Proxmox Support Forum

Hello, After booting into the recent Proxmox kernel 7.0.14-23-pve, my system encounters critical hardware and storage errors during startup, forcing it into an unstable state. Reverting to kernel 6.8.12-43-pve completely resolves the issue. Hardware Specs: - CPU: Intel Core i7-4790K - Motherboard chipset: Intel Z97 / 9-series Observed Errors from dmesg / Journal: [ 2.311073] zfs: module license 'CDDL' taints kernel. [ 2.923062] ZFS: Loaded module v2.2.10-pve1... Read more

Hi! First, a quick disclosure. I'm one of the developers at Hetman Software, a Ukrainian company that has been developing commercial data recovery software for over 15 years. I hope this doesn't come across as self-promotion. I'd like to propose a technical experiment, get feedback from experienced Proxmox administrators, and share what we find, including any failures or limitations. The idea is to build a Proxmox VE test environment, deliberately break something, and investigate what... Read more

Hi I appolagise if i am in the wrong place. I was torn between here and installation/configuration. I have seen a lot of posts about changing the ip address of your proxmox setup and to be honest the web gui and cli both seem to work fine. I had an ip address of 192.168.1.99 when i setup the server. When I setup vlans on my home network I setup the ethernet port to the server dedicated lan. then I changed the IP address to 192.168.20.99 after moving the ethernet to the new port and reboots... Read more

I'm trying to track down random, complete freezes on my Proxmox host, and I've run out of useful leads. Hardware - Motherboard: MSI X299 SLI PLUS (MS-7A93), BIOS 1.H0 (2020) - CPU: Intel Core i9-7920X (12 cores / 24 threads) - RAM: 128 GB DDR4-2400 (8 × 16 GB, non-ECC) - GPUs: 2 × RTX 3060 - Storage: ZFS mirrors for the host and guest storage, plus a SAS2308 HBA passed through to a TrueNAS VM - Network: USB 2.5 GbE adapter for the main bridge; onboard Intel I219-V available... Read more

Hi Is there any way of changing the router-id for the EVPN BGP. It uses multicast addresses by default and I can't connect it to the rest of my VXLAN domain since the network equipment wont talk to a device with a router-id that is a multicast address. I can't find anywhere in the config to change it permanently. I can change it in frr.conf and vtysh. But when I hit apply it returns to a multicast address. I have tried to add it to my frr.conf.local but it won't stick, the rest of the... Read more